Below is a table that details the dimensions and volume that each of our mini kegs and growlers can hold. It also includes the height of each of the taps as well as the max volume allowed when using Nitro.
Please ensure you consider the height of both the vessel and tap. However the taps can be removed at any time to allow you to store the keg lying down (or standing if you have room) This will leave the keg with a spear (6cm) on it (this has the valves that the tap connects to).
|Diameter||Height (Keg only, tap heights in next table)||Volume||Liquid Volume for Nitro|
|2L Standard Keg||13.5cm||20cm||2L / 6 Stubbies||1.2L / 5 x 8oz standard coffee|
|2L Black Insulated Keg||13.5cm||26cm||2L / 6 Stubbies||1.2L / 5 x 8oz standard coffee|
|4L Standard Keg||13.5cm||35cm||4L / 12 Stubbies||3.2L / 13 x 8oz standard coffee|
|4L Black Insulated Keg||17.5cm||29.5cm||4L / 12 Stubbies||3.2L / 13 x 8oz standard coffee|
|5L Standard Keg||17.5cm||28cm||5L / 15 Stubbies||4.2L / 17 x 8oz standard coffee|
|5L Black Insulated Keg||17.5cm||36cm||5L / 15 Stubbies||4.2L / 17 x 8oz standard coffee|
|10L Standard Keg||17.5cm||50cm||10L / 30 Stubbies||9.2L / 38 X 8oz standard coffee|
|19L Cornelius Standard Keg||21.5cm||64cm||19L / 57 Stubbies||18.2L / 76 x 8oz standard coffee|
|20L PET Fermenter Keg Jr||25.94cm||58.69cm||20L / 60 Stubbies||N/A|
|35L PET Fermenter Snub Nose||38cm||65.8cm||32L||N/A|
The below heights are from the mouth of the keg to the top of the tap when it is attached to the ball lock spear, except for the Party Pump which is a separate unit that screws into the mouth and does not require a ball lock spear.
|Tap / Spear Type||Height|
|Plastic Picnic Tap||12cm|
|Standard Chrome Tap||22cm|
|Steel Flow Control Tap on Steel Disconnect||20cm|
|Party Pump (Rechargeable Tap)||
|iKegger 2.0 Tap System (no regulator)||
|iKegger 2.0 Tap System (with regulator, to top of gas disconnect)||
GAS CAN NOT BE SHIPPED OUT OF AUSTRALIA
The cream charger bulb is traditionally used in a cream gun to whip cream. However they are also great for use in our nitro coffee and cocktail tapping system or in one of our all-in-one tap systems.
The nitrous oxide in cream charger bulbs is also the same "happy gas" used by dentists to dull your senses and make you giggle while they rip a tooth out. The kids call them nangs and fill balloons with it to inhale... We do not recommend or condone this though and take no responsibility for any consequences if you do.
What we suggest is that these chargers are ideal for pouring non-carbonated drinks that would usually be shaken eg espresso martinis or whiskey sours.
This cream charger gas imparts a very slightly sweet flavour to your beverage so if you want to avoid this you are better off using pure nitrogen (although you will use a lot more bulbs and have to wait longer for the gas to infuse).
To use these cream chargers in one of our mini-kegs you must leave at least 800ml of empty space in the keg for the bulb to inject into. Once you inject a bulb, shake the chilled keg and contents to absorb the gas. You may need more bulbs if you have left more than 800mls of empty space. Try pouring and if the pour is slow or without a creamy head repeat the above steps.
Each box contains 10 bulbs which is enough to dispense approximately 10-15L of nitro coffee or cocktails.
NOT FOR OUR STANDARD MINI REGULATOR (this is only suitable for threaded CO2 bulbs)
THESE BULBS ARE UNTHREADED AND ONLY SUITABLE FOR THE COFFEE AND COCKTAIL SPEAR AND TAP.
So far all purchases from these guys have been delivered super quick and are great quality. Thoroughly recommend.
I guess you can't go wrong with them :)
I bought these to use with the nitro brew system. Makes the coffee on tap super easy to use
The cream charges were part of a birthday pressie along with a 5l keg and tap for the coffee lover. Just have to show coffee lover how to play with her new toy. Win win