Below is a table that details the dimensions and volume that each of our mini kegs and growlers can hold. It also includes the height of each of the taps as well as the max volume allowed when using Nitro.
Please ensure you consider the height of both the vessel and tap. However the taps can be removed at any time to allow you to store the keg lying down (or standing if you have room) This will leave the keg with a spear (6cm) on it (this has the valves that the tap connects to).
|Diameter||Height (Keg only, tap heights in next table)||Volume||Liquid Volume for Nitro|
|2L Standard Keg||13.5cm||20cm||2L / 6 Stubbies||1.2L / 5 x 8oz standard coffee|
|2L Black Insulated Keg||13.5cm||26cm||2L / 6 Stubbies||1.2L / 5 x 8oz standard coffee|
|4L Standard Keg||13.5cm||35cm||4L / 12 Stubbies||3.2L / 13 x 8oz standard coffee|
|4L Black Insulated Keg||17.5cm||29.5cm||4L / 12 Stubbies||3.2L / 13 x 8oz standard coffee|
|5L Standard Keg||17.5cm||28cm||5L / 15 Stubbies||4.2L / 17 x 8oz standard coffee|
|5L Black Insulated Keg||17.5cm||36cm||5L / 15 Stubbies||4.2L / 17 x 8oz standard coffee|
|10L Standard Keg||17.5cm||50cm||10L / 30 Stubbies||9.2L / 38 X 8oz standard coffee|
|19L Cornelius Standard Keg||21.5cm||64cm||19L / 57 Stubbies||18.2L / 76 x 8oz standard coffee|
|20L PET Fermenter Keg Jr||25.94cm||58.69cm||20L / 60 Stubbies||N/A|
|35L PET Fermenter Snub Nose||38cm||65.8cm||32L||N/A|
The below heights are from the mouth of the keg to the top of the tap when it is attached to the ball lock spear, except for the Party Pump which is a separate unit that screws into the mouth and does not require a ball lock spear.
|Tap / Spear Type||Height|
|Plastic Picnic Tap||12cm|
|Standard Chrome Tap||22cm|
|Steel Flow Control Tap on Steel Disconnect||20cm|
|Party Pump (Rechargeable Tap)||
|iKegger 2.0 Tap System (no regulator)||
|iKegger 2.0 Tap System (with regulator, to top of gas disconnect)||
Choose how many taps you want from the list.
One tap, two tap and three tap fonts are available in this style.
A larger number of tap fonts are available however they are much more expensive and special order only, contact us if you are interested in flooded fonts, T bar fonts etc.
1. Bare font - this is just the steel tube with a rubber gasket and cap for the top. It is ready to screw to your bench or fridge and is lined with insulation. You will need to get a short shank, beer line, and connections separately.
2. With Shank, Line and Disconnect - this is the font as above but with the shank inserted to attach your own tap to. From the rear of the shank is push fitting connection to 1.5m of 4mm internal beer line and on the end of that a liquid disconnect. You will need to add your own tap.
3. With Basic Tap - As above but a complete kit including a budget chrome and brass tap.
4. With Flow Control Tap - The complete kit but with a high-quality stainless steel flow control tap. These are excellent for controlling how fast your beverage pours and how much head it pours with on the fly. You can use our stout spout with these taps for pouring stout, nitro coffee, espresso martini, whiskey sour etc on tap.