Zu Produktinformationen springen
1 von 1

Soda Stream Adapter For Mini Regulators

Soda Stream Adapter For Mini Regulators

Normaler Preis $25.95 AUD
Normaler Preis Verkaufspreis $25.95 AUD
Sale Ausverkauft
inkl. MwSt. Versand wird beim Checkout berechnet

65 auf Lager

  • 24/7 Customer Service
  • 30 Day Easy Returns
  • Free Shipping Over $249

These custom-made soda stream adapters allow you to use a 400g Soda Stream bottle with mini regulators (it screws in where a 16g CO2 bulb would). It is best to use this item with a remote gas line so the gas bottle doesn't need to be directly connected to the keg! If you have an iKegger 2.0 Mini Regulator you can get the sodastream adapter and remote gas line boxed here.

The adapter screw directly into the 16g bulb socket so swapping back and forward between bulbs and sodastream bottle is quick and easy.

  • Ensure the is inside the adapter and not damaged
  • Screw the adapter onto the gas bottle loosely almost all the way then hold it in place.
  • Screw the regulator onto the adapter finger tight
  • Use a spanner to tighten the last 1/4 turn of the adapter onto the gas bottle quickly to avoid losing any gas.


The Soda Stream bottle holds the equivalent of 25 x 16g disposable cartridges and can be swapped for a full one for $19 from your nearest retailer (see this map for your closest exchange location in Australia)

You can buy your initial Soda Stream Gas Bottle from us or from your closest retailer.

These are much more cost effective than 16g canisters while still being portable and small enough to take with you.

See An Installation Video Below

THIS ADAPTER PRESSES THE GAS RELEASE VALVE ON THE SODA STREAM BOTTLE. SCREWING THE ADAPTER ON ALL THE WAY WITHOUT THE REGULATOR IN PLACE WILL CAUSE YOU TO LOSE A LOT OF GAS!

Vollständige Details anzeigen

Useful Information

Filling Mini Kegs

  • At your local brewery, bar or bottle shop that does growler fills (they are everywhere now, just google "breweries near me" or ask your local).
  • With any spirits and mixers you like. Rum & Coke, G&T, Mojito etc.
  • Ask local coffee roasters or cafes for cold brew coffee refills.
  • Make up batch cocktails before parties or always have one ready for an evening aperitif in the fridge.
  • Use Mr Consistent or other similar products for pre-made cocktail mixers.
  • Any drink from cans or bottles (leave the rubbish behind, take up less space in fridge or esky & get a pub draft quality pour)
  • With your homebrew (so much easier than bottling, show off your brew in style!)
  • You may want to add the Auto-Stop Keg Filler if filling at breweries or with homebrew.

Shipping & Handling

SHIPPING & HANDLING

Free Shipping Within Australia for Orders Over $249

  • We offer free shipping within Australia when your order surpasses $249. It's our way of making your shopping experience as simple and enjoyable as possible. However, there are a few important details you should know, especially regarding large or heavy items.

Other Shipping Options Within Australia

  • Flat rate standard shipping for orders under 5kg: $14.95
  • Flat rate express shipping for orders under 5kg: $29.95
  • Orders over 5kg and under $249 will see a live quote from Auspost at checkout.
  • Kegerators: Freight Quote, an approximate cost is given at checkout. We will contact you to confirm any variation to that once we check all the options available.

Bulky, Heavy or Dangerous Goods Exclusion

  • While we would love to extend free shipping to all orders, some of the items we stock are bulky, heavy, or are classed as dangerous goods which makes this impossible. The prices of sending these items wildly vary. If your order includes any of the items listed above, the free shipping rate won't show at checkout. Instead, you will have a choice of the flat rate or live quoted express options.

International Shipping

  • We send our gear to anywhere in the world, the shipping cost is calculated at checkout.
  • We cannot send most gas products via air so please don't add them, you will likely see a crazy shipping quote price if you do.
  • Duties & Taxes may be payable on arrival in your country, we cannot give you a quote for these prior to the package arriving at the destination country.
  • It may be cheaper for shipping to shop on our European site at www.ikegger.eu

Handling Times

  • We strive to pack and dispatch all orders from our Wollongong NSW warehouse within 24 hours. While unforeseen events like illness or extreme weather can occasionally cause delays, we're dedicated to ensuring the fastest turnaround possible.
  • Please note that Auspost doesn't collect orders from us on weekends. If you place an order after midday on Friday, it will be dispatched on Monday.

Keg Sizes and Dimensions

iKegger Mini Keg Dimensions

Below is a table that details the dimensions and volume that each of our mini kegs and growlers can hold. The table shows the height of each keg with the included screw cap only. You may need to scroll right on mobile devices >>>

Keg Options Diameter Height
2L Silver Standard Keg 13.5cm 20cm
2L Black Insulated Keg 13.5cm 26cm
4L Black Insulated Keg 17.5cm 29cm
5L Silver Standard Keg 17.5cm 29cm
5L Black Insulated Keg 17.5cm 36cm
10L Silver Standard Keg 17.5cm 50cm

Tap and Spear Sizes

The heights listed below are from the mouth of the keg to highest point of the lid / tap when it is attached to the keg. To get the total height / depth (if it's lying down) add them to the height of your chosen keg above.

  • You can remove the spout and regulator of the iKegger 2.0 at any point for even more compact storage.
  • With a ball lock spear you can also remove the liquid and gas connections at any time.
Keg Lid Height Image

iKegger 2.0 Tap

(with regulator)

7.0cm

iKegger 2.0 Tap

(no regulator)

5.3cm

Ball Lock Spear

(top of liquid post)

6.0cm

Traditional Tap System

(with beer tap) 

24cm

24/7 Customer Contact

For the fastest answers about our products use the green chat button to talk to our AI assistant. Dave 2.0 is able to answer most questions about our gear but not live information like tracking your order or when item will be back in stock.

Our small, passionate team is also usually available to chat almost 24/7 due to having shops in both Australia and Germany. You can contact us via live chat, whatsapp, facebook messenger, instagram DM or email and we will respond as soon as humanly possible. As a small team we are often packing orders, unloading trucks or dealing with customers so it may not be an instant reply.

Returns & Warranty

Returns & Warranty

Warranty: We sell gear that is virtually unbreakable. All kegs and iKegger branded stainless products have a 5 year warranty (excluding consumable items like o-rings and seals) , other items have 1 year warranty.

Returns: You can change your mind and return unused gear for 30 days.

How we deal with any issues that do arise is where iKegger shines. Just see our reviews

Change of Mind: We offer a full refund within 30 days for unused, undamaged items in sale-ready condition. While you cover return shipping, we don't charge a restocking fee like some other companies.


Missing Items: We understand how disappointing it can be to discover missing items from your order. We want you happy and sharing a drink with your friends asap so we've streamlined the process.

Warranty Claims: A Smooth Process, Guaranteed

We stand behind the quality of our products and offer warranty coverage for your peace of mind. If you encounter a product issue covered by our warranty, here's how to get it sorted:

  • Showcase Your Setup: Like for missing items, the fastest way to get you pouring is seeing how you've set up your gear so send us a pic or video if possible. This allows us to immediately eliminate potential troubleshooting steps. In turn, this saves both you and us valuable time and effort, ensuring you can enjoy perfect performance as quickly as possible.
  • No Visuals? No Problem: If you are unable to send us a picture or video of the issue, please consult the manual that came with your gear or is located on the product page of the item you purchased before contacting us. Being able to troubleshoot using the same names for the various components stops conversations that run along the lines of "the do-hicky with the twist, near the part you pull has a drip coming out it" which while an interesting description doesn't help us have any idea what you are talking about.