Mini Kegs For Carbonated Drinks | Beer, Cider, Soda, Kombucha

Premium Black Insulated Kegs

Stay cold for up to 10 hours depending on the environment (but still a couple hours in full sun on a hot beach) without ice or cooler

The 2L is 13.5cm in diameter and 26cm tall.

The 4L and 5L are 17.5cm in diameter and are 30cm and 36cm tall respectively.

Sleek look powder coated black with silver laser cut logo.

Stackable design

Standard Silver Single Wall Kegs

Easy to chill quickly in a fridge or esky

The 2L and 4L are the same diameter at 13.5cm and are 20cm and 36.5cm tall respectively.

The 5L and 10L are the same diameter at 17.5cm and are 28cm and 50cm tall respectively.

Screw Cap Only

The keg alone with the standard screw cap lid that comes with it (this is also included when you get any of the other tap options).

Ball Lock Spear

This is a lid that screws into the keg with quick connect liquid & gas connections. These are standard & match tap or gas option on our shop that have a disconnect. There is also a 70 psi pressure release valve.

Pluto Gun Tap

The pluto gun is a great option for portability or pouring from your fridge. It can also be used with the keg lying down (with the included one way valve on the regulator to prevent liquid getting damaging it).

Stainless Flow Control Tap

This premium stainless tap allows adjusting the flow speed while pouring so you always get the perfect head.

The carry sleeves are custom made to fit our kegs.

By choosing yes we will include the one that matches your kegs system.

Getting them in this package is at least 30% cheaper than getting them alone so if you think you might want one grab it now!

You can see the sleeves as a separate item on our shop on this link

The sleeves include a shoulder carry strap and pockets for holding gas bulbs.

They are handy for carrying the insulated kegs and some spare gas and are like a big stubby cooler for the standard keg, extending the time they will stay cold.

No. Unlike some other products out there our tap and regulator are removeable allowing you to swap them between kegs.

If you add a mini keg with a ball lock spear you can switch the tap and regulator onto it at any point without losing gas or liquid from either keg.

If you add a mini keg with just a screw cap you can move the entire tap system across (which opens the keg to the air, an issue with beer but not most other drinks).

Yes, again unlike other options on the market.

You can disconnect the tap and regulator at any point without losing gas and the keg can be stored lying down in the fridge.

We thought this was a pretty vital attribute, otherwise how do you fit a growler upri ght in your fridge without it taking up the whole ting and you having to move all your shelves around?

There are multiple similar looking mini regulators available in Australia...

That does not mean they are the same quality. All of ours are tested at the factory and again by us before being sent.

Each one has a serial number lasered on it to track batches and has a 1.8k burst valve on the rear as a last-ditch safety precaution if something were to go drastically wrong.

The copycat ones have neither of these so they have no way of tracking faults in batches and are unsafe in worst case scenarios.

Ours are covered by a 1-year warranty (except if you screw in a gas source with the regulator turned on).

Don't take our word for it, read our reviews vs other companies and make up your own mind.